13. References
BS EN 1993: Eurocode 3: Design of steel structures.
BS EN 1993-1-1:2005 General rules and rules for buildings.
BS EN 1993-1-2:2005 Structural fire design.
BS EN 1993-1-3:2006 Cold-formed thin gauge members and sheeting.
BS EN 1993-1-4:2006 Stainless steels.
BS EN 1993-1-5:2006 Plated structural elements.
BS EN 1993-1-6:2007 Strength and stability of shell structures.
BS EN 1993-1-7:2007 Strength and stability of planar plated structures transversely loaded.
BS EN 1993-1-8:2005 Design of joints.
BS EN 1993-1-9:2005 Fatigue strength of steel structures.
BS EN 1993-1-10:2005 Selection of steel for fracture toughness and through-thickness properties.
BS EN 1993-1-11:2006 Design of structures with tension components made of steel.
BS EN 1993-1-12:2007 Supplementary rules for high strength steel.
BS EN 10025: Hot rolled products of structural steels.
Part 1: 2004, General technical delivery conditions.
Part 2: 2004, Technical delivery conditions for non-alloy structural steels.
Part 3: 2004, Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels.
Part 4: 2004, Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.
Part 5: 2004, Technical delivery conditions for structural steels with improved atmospheric corrosion resistance.
Part 6: 2004, Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition.
BSI, 2004
BS4 Structural steel sections
BS4-1: 2005: Specification for hot rolled sections
BSI, 2005
BS EN 10034: Structural steel I and H sections. Tolerances on shape and dimensions
(Replaces BS 4-1: 1980)
BSI, 1993
BS EN 10024 Hot rolled taper flange I sections. Tolerances on shape and dimensions
BSI, 1995
BS EN 10279 Hot rolled steel channels. Tolerances on shape, dimension and mass
(Including amendment 1, amendment 2: 2000)
BSI, 2000
BS EN 10056: Specification for structural steel equal and unequal angels
BS EN 10056-1: 1999 Dimensions
(Replaces BS 4848-4: 1972)
BS EN 10056-2: 1993 Tolerances on shape and dimensions
(Replaces BS 4848-4: 1972)
BSI, 1999
BS EN 10210 Hot finished structural hollow sections of non-alloy and fine grain structural steels
BS EN 10210-1: 2006 Technical delivery requirements
(Replaces BS 4360: 1990)
BS EN 10210-2: 2006 Tolerances, dimensions and sectional properties
BSI, 2006
BS EN 10219 Cold formed welded structural sections of non-alloy and fine grain steels
BS EN 10219-1: 2006 Technical delivery requirements
BS EN 10219-2: 2006 Tolerances and sectional properties
BSI, 2006
National Structural Steelwork Specification for Building Construction, 5th Edition
The British Constructional Steelwork Association Ltd., 2007
Advance® Sections: CE marked structural sections
Tata Steel Europe Ltd
Available from www.tatasteelconstruction.com
NETHERCOT, D.A., SALTER, P.R. and MALIK, A.S.
Design of members subject to combined bending and torsion (SCI-P057),
The Steel Construction Institute, 1989
MORREL, P.J.B.
The behaviour of rectangular hollow section steel beams under concentrated flange loading.
PhD Thesis, CNAA
Brighton University, January 1971
CHAN, T.M. and GARDNER, L.
Compressive resistance of hot-rolled elliptical hollow sections.
Engineering Structures, 2007
Elsevier Ltd
GARDNER, L. and CHAN, T. M
Cross-section classification of elliptical hollow sections
Steel and Composite Structures, Vol. 7, No. 3 (2007) 185-200
Elastic Moduli of Angle Sections (AD340)
Available from www.steelbiz.org
Tension resistance of angles in SCI P363 (AD351)
Available from www.steelbiz.org
SALTER, P.R.
Assessment of design using cold-formed hollow sections
SCI Report, RT652
The Steel Construction Institute, 1998
BS EN 1090-2:2008 Execution of steel structures and aluminum structures. Technical requirements for the execution of steel structures.
BS EN 14399 High-strength structural bolting assemblies for preloading.
BS EN 14399-1: 2005 General requirements
BS EN 14399-2: 2005 Suitability test for preloading
BS EN 14399-3: 2005 System HR. Hexagon bolt and nut assemblies
BS EN 14399-4: 2005 System HV. Hexagon bolt and nut assemblies
BS EN 14399-5: 2005 Plain washers
BS EN 14399-6: 2005 Plain chamfered washers
BS EN 14399-9: 2009 System HR or HV. Bolt and nut assemblies with direct tension indicators
BS EN 14399-10: 2009 System HRC. Bolt and nut assemblies with calibrated preload
BSI, 2005
BS EN 15048 Non-preloaded structural bolting assemblies
BS EN 15048-1:2007: General requirements
BS EN 15048-2:2007: Suitability test
Access steel document SN002
NCCI: Determination of non-dimensional slenderness of I and H sections
Available from www.steelbiz.org
Access steel document SN001
NCCI: Critical axial load for torsional and flexural torsional buckling modes
Available from www.steelbiz.org
Access steel document SN003
NCCI: Elastic critical moment for lateral torsional buckling
Available from www.steelbiz.org
Steelwork design guide to BS 5950-1:2000, Volume 1: Section properties, member capacities, 7th edition (P202)
The Steel Construction Institute and The British Constructional Steelwork Association Ltd, 2007
KLEINLOGEL, A
Rigid frame formulas (translated from German: page 418)
Fredrick Ungar Publishing Co., 1958
GARDNER, L. and CHAN, T. M
Shear resistance of elliptical hollow sections
Proceedings of the Institution of Civil Engineers - Structures and Buildings Vol 161, Issue 6, (December 2008)
BS 4933: 1973 Specification for ISO metric black cup and countersunk head bolts and screws with hexagon nuts
BS EN ISO 4014:2001 Hexagon head bolts. Product grades A and B
BS EN ISO 4017:2001 Hexagon head screws. Product grades A and B
BS EN ISO 4016:2001 Hexagon head bolts. Product grade C
BS EN ISO 4018:2001 Hexagon head screws. Product grade C
BS EN ISO 4032:2001 Hexagon nuts, style 1. Product grades A and B
BS EN ISO 4034:2001 Hexagon nuts. Product grade C
BS EN ISO 898-1:1999 Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs